10 DIY School Supplies! Easy – Weird DIY Crafts for Back To School! Candy DIYs – Mini Pens & more!
- Articles, Blog

10 DIY School Supplies! Easy – Weird DIY Crafts for Back To School! Candy DIYs – Mini Pens & more!


hey guys welcome back to my Channel
today I’m going to show you how to make 10 DIY school supplies if you enjoy this
video please click that like button and comment down below with any future video
suggestions you might have if you’re not already subscribed and would like to see
more fun DIY videos please click that subscribe button first DIY i will show
you is how to make a Rolo’s pencil case so to make this Rolo’s pencil case you
will need a gift wrap tube like this mark off at eight inches and then cut that
out with the piece i just cut i made another
marking out 1 1/2 and then I cut that off at this point you should
have two pieces that look like this with at this point you should
have two pieces that look like this with a piece of sandpaper just sand down any
rough edges with a piece of brown foam I made to markings 1 at it 4 1/2 and 1 at 2 I connected those and then cut that out apply hot glue to one of the edges and
then glue the two edges together with a piece of heavy cardstock poster
board or a piece of foam apply some glue to the bottom of the big tube & to the
top of the small tube and glue that to the cardstock poster board or piece of
foam cut off any extra paper that is beneath the cardboard tubes place the piece of brown foam into the
longer cardboard tube leaving about 3/4 of an inch showing place some hot
glue on the foam to secure it to the cardboard tube next you will need some gold foil i’m
going to use these candy wrapper foils but you can also use the gold foil for
gift wrapping wrap one of the squares around the top so it resembles a Rolo’s
packaging unfold the wrapping from inside place
some hot glue around it to secure the gold foil to the cardboard tube and here is what my top looks like do
the same thing on the tall tube but this time apply it to the bottom of the
cardboard tube next you will need to print out this
printable and cut it down to size i will leave a link down below to where you can
print this out apply some hot glue to the label and
then secure it to the tube and that is how you make a Rolo’s candy pencil case for the second project i will show you
how to make a hubba bubba eraser with an xacto knife carefully cut down the
front side in the center and then do the same thing on the back once the label has been carefully cut you can
open it up and enjoy the gum inside for the next part you will need two of these
pink eraser clay pieces you’ll just want to roll those together and then with a
rolling pin roll them out once it’s rolled out start cutting
strips the same size as the bubble gum what I did when I just took the excess
rolled it back together rolled it out and cut more strips until I had enough
that I could make a big long strip of bubble gum once had enough pieces cut out i
started joining those together and smoothing out the edges where they met next I just rolled it up once i had it
all rolled up then I baked it according to the package instructions here is mine after it was baked you can
just put it in the case and the part that’s sticking out if you want to close
it completely you can just tuck that in and that is how you make the hubba bubba
eraser number three is going to be bubblegum pens to make this you will need a pack of
bubblegum you want to slowly begin by tearing the flap part off so you don’t
wreck too much of the wrapper enjoy the gum inside and save the
wrapper’s next you’ll need a piece of pink card stock paper and then you’ll
want to measure out the wrapper’s to get the correct size take the measurements
from the wrapper and mark that off onto the pink cardstock then you
will just want to cut that out you will need two of these for each stick of gum
you want to make i’m going to use the ink from one of these mini pens cut the
ink down to size so it fits in the wrapper apply some hot glue to one piece of the
pink card stock place the ink on that and then glue the other piece of pink card
stock to that one trim down one side of the wrapper place your pen inside and
then secure it with some hot glue now you can add them back to the bubble gum
pack and you have your very own bubble gum pens for the fourth project these
are super easy candy bookmarks i’m going to use the packages from these gums
anything that is made from the cardboard candy packaging will work well for this
trim the Box down so you’re left with just one side with the hole punch punch
a hole into the cardboard with a piece of ribbon cut it down to size and thread
it through the hole that was punched tie it into a double knot and then you will
have your very own candy bookmark for the fifth DIY school project I will show
you how to make licorice pens for this you will need red polymer clay and a
star tip that you can find in the baking aisle roll half the clay into a ball and then
into a tube shape place it into the star tip and start pushing it through i used
a sharpie marker to push it through once you have a long enough piece just break
it off and then just trim down the end so it looks like size of licorice
with a wooden skewer or a toothpick make a hole into one side of
the clay and you’ll want to make it deep enough for long enough for an ink barrel
to fit through i will be using the ink from one of these mini pens if you don’t
have one you can just cut some ink down to size place the ink into the clay and then
trim it down to size start twisting it so it looks like
licorice and bake it according to the package instructions once it’s been
baked and cooled you can add the ink to the clay and if you want you can secure
it with hot glue mine was pretty snug so it didn’t fall out and that is how you
make licorice pens for in the next project i will show you how to make
licorice erasers for this you will need some eraser clay i’m going to use this
kind right here and you will need the red piece and you will just want to do
the same thing as with the licorice pens and push it through the star tip once
I’ve been done trim it down to size and bake it according to the package instructions
here is mine after it was baked and this is how it works the 7th DIY comes from a previous projects
i made so after this video invite you to head on down to the link below and check
out my candy pens for the 8th DIY i will show you how to make a push pop
pencil case for this one you will also need a piece of gift-wrapping tube you will
want to market off at eight inches and cut it out this one will be similar to the Rollo’s
but a little bit different for the top on this one you will want to mark it off at two
inches and then cut that off use sandpaper to get rid of any rough edges for the
bottom on this one I’m going to use a piece of pink foam i just applied some
hot glue around the bottom of the cardboard tube glued it to the foam and
then cut off any excess for the top I’m going to use a piece of white card stock cut out a piece of pink foam that is
4 1/2 by 2 apply some hot glue on the edge and glue the two edges together place the piece of pink foam into the
larger cardboard tube leaving about an inch showing apply some hot glue around
the foam to secure it to the cardboard tube on this one only the top will need
to be painted you can either use spray paint or acrylic paint the bottom you
will be one of these printables i will leave a link down below where you can
print it out once it’s printed out then just cut it down to size for this one
I’m going to secure it with some Elmer’s glue the next thing I did was I just
secured it to the cardboard tube once the top is dry you can place it onto
the bottom of the cardboard tube and that is how you make a push pop pencil
case the Ninth project i will show you how to make candy notebooks for this one
you will need a cardboard candy box and what you want to do is you’ll just want
to cut off the flaps and then cut down one of the sides so it has the folder
look next you’ll need some binder paper
you’ll want to measure the inside of the box and then cut the binder paper down
to size you will want to cut enough sheets to where you have a big enough
notebook here are mine after i was done i’m going to use some binder clips to secure
those in place and then with some Elmer’s glue i’m going to apply that to
the top and with a paintbrush i’m going to smooth it out this is how I’m binding the notebook
together let that dry for 24 hours and then I remove the binder clips I applied some Elmer’s glue to the candy
box and glued the notepad to that and that is how you make candy notebooks for
the last and final project i am going to show you how to make a gummy worm pencil
case and you can eat the gummy worms for this you will need 2 sheet protectors
start by cutting off the sides of both sheet protectors next you will need to find a hard
surface you can stick between the sheet protector i’m going to use this small
cutting board mark off halfway down the sheet protector and then cut on that
line with a pair of scissors cut down the sides of the sheet protector making
sure to only cut through one layer of the sheet protector what you have at
this point essentially you should have a flap on the second layer or the long
part of the sheet protector that is still left mark it off halfway from the
edge to the marking that is halfway take an xacto knife and cut that off
diagonally you’ll want to repeat the same process on the other side here is what it should look like you
will want to repeat these same steps with the other sheet protector fold the
flap over so it looks like an envelope hot glue around all four sides of the
sheet protectors to glue the two together the sheet protectors are clear and you
can see the hot glue i’m going to use some of this rainbow duct tape to finish
off the sides for the bottom measure off enough tape to fit across the bottom
then tape that to the front side fold it over to the back side and just trim off
any excess for the sides measure out enough tape to fit – fold the piece in
half and cut at a 45-degree angle then place the point on the bottom of the
tape of the front trim off any excess and folded over to the back by making
the 45-degree angle cut it gives it more of a cleaner look when its done for the top take a piece of tape long
enough to fit across cut it in half take half of it and tape it to one side and
then the second half to the other side to give it a cleaner look I drew diagonal
lines and then with a pair of scissors i cut on that diagonal line to hold the flaps in place i’m going to use
some of these small circle pieces of velcro and to finish it off i just cut
out some small pieces of the tape and then I covered up that piece of velcro now for the fun part take some gummy worms and then just add
those to one side and then the other side you can add your pens and your
pencils and that is how you make a gummy worm pencil case I hope you guys enjoyed
these 10 DIY school supply ideas i would love it if you give this video a thumbs
up let me know which one your favorite was in the comments until next time I
hope you guys all have an amazing day

About James Carlton

Read All Posts By James Carlton

100 thoughts on “10 DIY School Supplies! Easy – Weird DIY Crafts for Back To School! Candy DIYs – Mini Pens & more!

  1. Here's how I made the hubba bubba eraser

    Step 1:
    Buy hubba bubba

    Step 2:Eat all the gum

    Step 3:Buy an eraser and stick it in there

    Voila!

  2. I was like, these are all awesome, but the only ones u can eat have gum involved. Then I discovered u can eat the gummy worms. YES!!! BTW, my favorite candy is Skittles!!

  3. Find the difrents 😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜😛😜😜😜😜😜😜😜

Leave a Reply

Your email address will not be published. Required fields are marked *